Canon imagePROGRAF PRO-1000 Driver for Windows and macOS

This supports the A2 format and is still compact enough to be able to place on the desk. With a footprint of 723 x 433mm and a height of 285mm, the Canon imagePROGRAF PRO-1000 is 32 kg and it is not necessarily something for use in different places. One of the decisive factors for a photo printer is the resolution, which is specified as 2400 x 1200 dpi for this model. The printer can be operated with normal and photo paper. The feeder is located on the rear side of the device, into which media to be printed in B5 to A2 format can be inserted. This also applies to Legal and Letter. This printing system requires twelve ink cartridges and also uses the Chroma Optimizer to achieve greater color depth and better gloss properties. Incidentally, all cartridges are included in the scope of delivery and each has a capacity of 80 ml. A special feature of the model is the automatic detection of clogged nozzles. There are 1536 nozzles per channel, i.e. color. If some of them fail, which is mainly due to blockages, the error is recognized by the system and compensated by using other nozzles. The cleaning then takes place after the print job, which should save time. The manufacturer states that with this hardware, an A2 photo is put on paper in about six minutes. The Canon imagePROGRAF PRO-1000 proves to be a high-quality solution for slightly larger photo prints, which is relatively quiet in operation at 41 dB. Of course, it is priced well above classic small-format devices, but up to ten of the twelve cartridges can be used at the same time. To connect to the source device, there is network support via WLAN or Ethernet in addition to the USB interface.

Canon imagePROGRAF PRO-1000 driver for Windows and macOS

Canon imagePROGRAF PRO-1000 driver

To download the driver, click the link directly based on your operating system. Please refer to the compatible OS and installation tutorial before downloading the driver.

Canon imagePROGRAF PRO-1000 Driver’s Windows and macOS Compatibility

Before installing the driver, Canon imagePROGRAF PRO-1000 is compatible with the following operating systems:

  • Windows 11 (32bit / 64bit)
  • Windows 10 (32bit / 64bit)
  • Windows 8.1 (32bit / 64bit)
  • macOS 12 (Monterey)
  • macOS 11 (Big Sur)
  • macOS 10.15 (Catalina)
  • macOS 10.14 (Mojave)
  • macOS 10.13 (High Sierra)
  • macOS 10.12 (Sierra)

Download Canon imagePROGRAF PRO-1000 Driver for Windows and macOS

This driver is compatible with Windows and macOS. Unfortunately, this site does not provide Canon imagePROGRAF PRO-1000 drivers/software for other operating systems listed above. All drivers and full software download links can be accessed from the official Canon.

Windows driver:
Canon imagePROGRAF PRO-1000 series Full Driver & Software Package

Canon imagePROGRAF PRO-1000 series Printer Driver Ver.1.10

macOS driver:
Canon imagePROGRAF PRO-1000 series Full Driver & Software Package [macOS]

Canon imagePROGRAF PRO-1000 series CUPS Printer Driver Ver. [macOS]

Canon imagePROGRAF PRO-1000 Driver Installation Instructions:

For more information, see Canon imagePROGRAF PRO-1000 Manual

Installation procedure on Windows: The printer requires the Canon imagePROGRAF PRO-1000 Driver and software files. Download the driver and connect the USB cable from the printer to your computer. Then follow the instructions on how to install the printer driver in the installation window.

Installation procedure on macOS: Download the file and mount the disk image (if available). When you open the installer file in the folder, the installation will start automatically. When you’re done, connect your printer and you’re ready to use your Canon imagePROGRAF PRO-1000 printer.

Leave a Reply

Your email address will not be published. Required fields are marked *